VCS VideoJet 8000 User Manual page 62

Configuration using a Web Browser
Unit name:
The unit can be assigned a name to assist in identifying it. This name will be
overlaid on the video image, depending on the configuration. Furthermore, device
names simplify the administration of multiple units in larger systems using
programs such as VIDOS from VCS.
Note
The unit name is used to identify a unit remotely, such as in the case of an
alarm call. Enter a designation that makes it as easy as possible to identify
the location unambiguously.
Unit ID:
Each VideoJet 8000 should be assigned a unique identifier that can be entered
here as an additional means of identification.
Web site language:
Here you select the language of the user interface.
user name:
A VideoJet 8000 unit is generally protected by a password to prevent
unauthorized access. The VideoJet 8000 uses three levels of authorization: live,
service and user.
The service authorization level allows you to use all the functions of the
VideoJet 8000 and change all the settings after entering the proper password.
The user authorization level allows you to operate the unit and control cameras
but not to change the configuration.
Live authorization allows you to view live images but neither change the
configuration nor control cameras or other peripheral devices.
Password:
You can define and change passwords for each authorization level if the unit is
not password protected or if logged on with service authorization. Only one
password at a time can be changed. To change the password of another
authorization level, this configuration page must be reloaded.
Confirm password:
Re-enter the new password to avoid typing errors.
62
Chapter 5
VideoJet 8000