VCS VideoJet 8000 User Manual page 95

Chapter 5
Remaining for recording:
Here the maximum time remaining for recording is displayed. It is automatically
updated after the parameters are changed.
Deleting partitions
Partitions can be deleted at any time.
Warning!
Deleting a partition causes the entire hard drive to be reorganized and all
sequences stored on it to be lost. Therefore, before deleting partitions,
check the recordings and back up the important sequences to your
computer's hard drive.
– Click Format to delete the partition currently shown.
Activating partitions
After configuring a partition, it can be activated by clicking the Start button and
thereby starting recording activities.
After the partition is activated the entire field for it will be shown as gray. The icon
at the bottom of the page indicates the recording status on the partition. When a
recording is being made, the icon is animated.
Recording activities can be stopped at any time, and one, several or all partitions
can be deactivated.
– Click Start to activate the currently selected partition and begin recording
activities for it.
– Click Start all to activate all the configured partitions and begin the associated
recording activities.
– Click Stop to deactivate the currently selected partition and terminate its
recording activities.
– Click Stop all to deactivate all the configured partitions and halt the associated
recording activities.
VideoJet 8000
Configuration using a Web Browser
95