VCS VideoJet 8000 User Manual page 38

Configuration using a Web Browser
Warning!
Reflections of light (on glass surfaces, etc.), switching lights on or off or
changes in the light level caused by cloud movement on a sunny day can
trigger unintended responses from the video sensor and generate false
alarms. Run a series of tests under day and night conditions to ensure that
the sensor works as intended.
For indoor surveillance, ensure constant lighting of the areas during the day
and at night.
Uniform surfaces without contrast can trigger false alarms even with
constant lighting.
– Click Motion Detector to open the configuration page for the video sensor.
– Click one of the tabs to access the configuration of the corresponding
encoders (or camera).
– Click Reset in the Default settings area to revert the settings to their default
values.
– Click the remaining tabs to access and edit the configurations of additional
encoders.
– After you are finished with configuration, click Back to Overview page! to
return to the graphical overview of the system.
Motion detector
Select On to activate the video sensor.
Sensor fields
The areas of the image to be monitored by the video sensor can be selected. The
video image is subdivided into 192 square sensor fields. Each of these fields can
be activated or deactivated individually. If it is necessary to exclude particular
regions of the camera's field of view from monitoring due to continuous
movement (by a tree in the wind, etc.), the relevant fields can be deactivated.
– Click Select area to configure the sensor fields. A new window will open.
– If necessary, click Clear all first to clear the current selection (fields marked
red).
– Click the fields to be activated. Activated fields are marked red.
– Click Select all to select the entire video frame for monitoring.
38
Chapter 5
VideoJet 8000