Chapter 4 Installation - VCS VideoJet 8000 User Manual

Installation
The VideoJet 8000 is designed for tabletop operation and installation in control
cabinets. The supplied mounting kit makes installation in a 19" rack fast and easy.
Four self-adhesive, anti-slip rubber feet are included with delivery. These can be
attached to the bottom of the unit.
Warning!
The unit is intended for indoor use only. Choose a suitable location for
installation where the equipment will not be subject to extremes of
temperature or humidity. The ambient temperature must be between 0 and
+50 °C. The relative humidity should not exceed 80% (no condensation).
The unit generates heat during operation. Ensure that there is adequate
ventilation and also that there is enough clearance between the unit and
heat-sensitive objects or equipment.
Please ensure the following conditions for installation:
Do not mount the unit close to heaters or other heat sources. Avoid locations
in direct sunlight.
Allow sufficient space for running cables.
Ensure that the unit has adequate ventilation. For cabinet installation of
multiple units, pay particular attention to the overall thermal load.
Use only the cables supplied for connection, or appropriate cables resistant to
electromagnetic interference.
Position and run all cables so that they are protected from damage, and
provide strain relief where needed.
VideoJet 8000
4
17