Power Failures; Power Save; Using The Touch Screen - Kodak DryView 6800 User Manual

Power Failures

Power Save

Using the Touch Screen

January 17, 2007
In the event of a power loss, the 6800 Laser Imager shuts down. Films in
process will not be completed and will remain where they are until they are
removed (see "Correcting Film Jams With the Imager Powered OFF" on
page 3-2).
To restart the Imager after power is restored, turn OFF the power switch on
the Imager and then turn it ON. After warming up, the Imager automatically
reprints any films that were in process when power was interrupted.
NOTE: If the Imager does not restart after pressing the power switch, press
the power button on the local panel (see
and OFF" on page
The Imager has a Power Save option, which lets you reduce the power
consumption of the Imager during periods of inactivity. To learn more about
the Power Save option, see the general help information on the touch screen
(see "General Help" on page
Unlock icon
Use the touch screen to monitor Imager operations and to control some
Imager functions.
8F2927
Using and Maintaining the Imager
"Turning Imager Power ON
2-1).
2-6).
Help icon
Film drawer icons
2-3