Configuring The System For Fieldnet - Leica iNEX User Manual

11.1 Configuring the System for FieldNET

While the FieldNET radios will come preconfigured, you may be required to
change the Group ID on the radio if interference from other nearby
FieldNET radios is experienced. See appendix 15.2 Setting the FieldNET
Radio Group ID.
After connecting the FieldNET radio and enabling the FieldNET option the
next step is to configure the settings in the iNEX.
1. From the Main Menu press SETUP.
2. Press MORE.
3. Press
FIELDNET
4. Press the FieldNET
ON is displayed.
5. Select the number of vehicles in the
FieldNET group by pressing on the Radios
in Group button.
6. All FieldNET radios in the group require a
unique number. Select this number by
pressing on the Radio ID button.
iNEX User Manual
SETUP.
button until
ON/OFF
Page 87 Rev 2