Table of Contents
Advertisement
12.5.1 Force Shutdown
If the iNEX becomes unresponsive and cannot be turned off, then a forced
shutdown may be required.
A shutdown can be forced by removing power to the Display for 30
seconds.
Or
Press and hold the Power button for five seconds until three long beeps
are heard.
12.5.2 Check Disk
Running Check Disk will cause the iNEX to scan the drive for any
corruption and fix it if possible. There is a very low chance of losing any
treatment data or settings.
1. Start the iNEX into Launcher mode
(see 12.1 Starting Up in Launcher
Mode).
2. Press
SYSTEM
3. Press
CHECK
iNEX User Manual
TOOLS.
DISK.
Page 94
Rev 2
Advertisement
Table of Contents
