Leica iNEX User Manual page 71

6.7.2 Logging In as the Current Driver
Once the system is setup for Driver Login at startup, when the iNEX is
turned ON the user can login. If this option has not been set then the
current driver can be changed in the Current Job settings.
1. From the Main Menu press SETUP.
2. Press
CURRENT
3. Press DRIVER.
4. Select the driver from the list and press
SELECT.
5. If a password is set, enter the
password and press TICK.
6.7.3 About Security Levels
Each driver User Level, being High, Medium or Low, determines how much
access the operator will have to the system.
Low is typically used for temporary operators who have little knowledge
of the iNEX. When Low is selected the operator will not be able to change
operational settings such as vehicle setup, AutoSPRAY configuration, etc.
Medium is typically used for most operators and this setting allows them
full access to the iNEX but limits the ability to delete any data such as
complete seasons or products.
High allows the operator full access to the iNEX with no limitations; this
setting is typically reserved for owners and managers.
iNEX User Manual
JOB.
Page 64 Rev 2