Leica iNEX User Manual page 42

4.3.4 Using Pivot Guidance
Pivot Guidance is an optional feature and must be enabled before it can
be selected and used. Once enabled Pivot Guidance can be set as an
Active Guidance Type and will appear on the Guide menu. See section 4.2
Selecting Active Guidance Types.
1. From the Main menu press GUIDE.
2. Drive to the start point of the circle,
such as an irrigator wheel track and
press PIVOT.
A large black dot is marked on the
screen to indicate the A Point.
3. Drive partially around the circle and
press PIVOT.
Another large black dot is marked on
the screen indicating the B Point.
4. Drive further around the circle and
press PIVOT.
Another large black dot is marked on
the screen indicating the C Point.
The Pivot button changes to show three
points for the line have been recorded,
but Guidance is not active.
5. Press
PIVOT
Guidance.
The Map Screen shows a red circle
which passes though the A, B & C
Points.
The Virtual Road Window shows the
path to be followed by the operator.
iNEX User Manual
a fourth time to activate
Page 35 Rev 2