Leica iNEX User Manual page 64

7. If the plan selected is for spraying then
set the desired flow rate by pressing
the Flow Rate button and entering the
required value.
8. By default the system will set the
amount to the maximum tank size. To
change this press the Amount button.
9. The amount can be changed by volume,
percentage of tank or by area covered by
the current flow rate. Press
adjust the tank volume.
10. Press PRODUCT.
11. Press the Product name button and
select a product from the list or add a
new product if required (see 6.4.2
Creating a New Product) and press
SELECT.
12. Set the product application rate by
pressing on the Rate button or set the
amount of product being added to the tank by pressing on the
Amount button.
13. Optionally the Batch number for the product being used can be
selected by pressing on the Batch button and selecting the batch
from the list or adding a new batch number. See 6.4.3 Adding a
Product Batch.
14. Press
ACCEPT
15. Add as many products as required by pressing
16. Product quantities, rates, and batch details can be changed by
selecting the product and pressing EDIT. Products can be removed
from the list by selecting the product and pressing REMOVE.
iNEX User Manual
ACCEPT
to add the product to the tank.
Page 57
the
to
PRODUCT
again.
Rev 2