Leica iNEX User Manual page 43

6. To continue on another concentric Pivot circle drive to the next pass
and the system will automatically jump to the nearest guideline.
Note: The A, B and C Points must be at least 30m apart, it is recommended but not essential to
space these points as evenly around the circle as possible to maximise accuracy in the key
guideline.
Note: A new Pivot guideline can be created by pressing the PIVOT button when Pivot Guidance is
active. The operator will be warned before the existing line is replaced.
Note: The operator will be warned and prevented from defining a C point if the radius of the
circle created by A, B & C points is too large or in a straight line.
Page 36 Rev 2
iNEX User Manual