Using Guidance - Leica iNEX User Manual

4.3

Using Guidance

4.3.1 Using Parallel Guidance
By default Parallel Guidance will be selected as one of the Active Guidance
Types and is available on the Guide menu. See section 4.2 Selecting
Active Guidance Types.
1. From the Main menu press GUIDE.
2. Drive to the start point of the line and
press PARALLEL.
A large black dot is marked on the screen
to indicate the A Point.
3. Drive to the end point of the line and
press PARALLEL.
Another large black dot is marked on the
screen indicating the B Point.
4. Press
PARALLEL
Guidance.
The Map Screen shows a red line which
passes though the A & B Points.
The Virtual Road Window shows the path
to be followed by the operator.
5. To continue on another Parallel pass
simply turn the vehicle around and the
system will jump to the nearest guideline.
Note: The A and B Points must be at least 30m apart. It is recommended but not essential to
space these points as far apart as possible to reduce any error in the key guideline.
Note: A new Parallel guideline can be created by pressing the PARALLEL button when Parallel
Guidance is active.
iNEX User Manual
a third time to activate
Page 32 Rev 2