Leica iNEX User Manual page 45

4.3.5.3 Activating RePLAY Guidance
Once a RePLAY file has been loaded it is a simple process to activate
RePLAY Guidance and follow the guideline.
1. Press REPLAY.
A red guideline is shown on the Map
Screen. This line follows the path of the
treatment the RePLAY file was created
from.
The Virtual Road Window shows the
path to be followed by the operator.
2. To follow the guideline simply drive to
any track and the Guidance
automatically jumps to that guideline. No other action is required
by the operator.
Note: Before a RePLAY file can be created, a treatment must be completed and archived. See
5.2.2 Archiving a Field.
Note: If no path is displayed on the screen after activating RePLAY, check that the RePLAY path
loaded is for the current vehicle location – no path will be displayed if the vehicle is too far from
the path.
iNEX User Manual
Page 38 Rev 2