Using The Tank Manager - Leica iNEX User Manual

6.4

Using the Tank Manager

The Tank Manager has two main purposes, to record the products which
are being applied in the treatment and also to aid the operator calculating
how much of each product to add to the tank to achieve the desired rate.
The Tank Manager can be used in two different ways. The first way
generally suits owner/operator type farms where products are recorded
on the go as the tank is filled on the vehicle. The second way, using plans
imported from a USB memory stick, generally suits larger farms where
treatment plans are made ahead of time using PlanIT. The operator can
then load the plan to determine the products with which to fill the tank.
6.4.1 Recording Products Applied
The products which are being applied should be entered in the iNEX
before starting the treatment. If done when filling the tank the system
calculates the quantities of each product required.
1. From the Main menu press RECORDS.
2. Press TANK.
3. Press FILL.
4. Press PLAN.
5. Select the Plan to load and press
SELECT. To add products on the go and
not use an actual plan, select from the
Default list (either Seeding, Spraying or
Spreading).
6. Target Field will be "Any Field" for the
Default Plan. Press ACCEPT.
iNEX User Manual
Page 56 Rev 2