7.5
Configuring Remote Buttons
The iNEX has the capacity for five remote buttons to be configured by the
operator. The first four, labelled button 1, 2 ,3 & 4 are on top of the
Display. The fifth remote button, labelled Remote Input can be connected
to detect any momentary switch. See the iNEX Installation Manual (Part
No. 1-1296) for further instruction.
1. From the Main menu press SETUP.
2. Press MORE.
3. Press
REMOTE
4. Press on the remote button which is
to be configured
(Button 1- 4 or Remote Input).
5. Select the shortcut function from
the list and press SELECT.
iNEX User Manual
BUTTONS.
Page 71
Rev 2