Device Installation Or Removal Procedure; Side Cover - NEC N8100-1078F User Manual

DEVICE INSTALLATION OR REMOVAL PROCEDURE

Install or remove a component from the server in the following procedure.

Side Cover

The left side cover should be removed to access to built-in devices and/or mother board in the server.
It is not necessary to remove the right side cover.
Removal
Remove the left side cover in the following procedure.
Observe the following instructions to use the server safely. Failure to follow
these instructions may result in death or serious personal injury. See pages 1-
3 to 1-8 for details.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Loosen the two screws.
3.
Slide the cover backward a little.
4.
Hold the side cover securely to remove it.
Screws
Disconnect the power plug before working with the server.
Upgrading Your Server 9-5
WARNING