NEC N8100-1078F User Manual page 250

9-32 Upgrading Your Server
17.
When the message "Programming complete, reboot server for normal operation" appears,
take out the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, and press the
Reset button or cycle the power to reboot the system. (Resetting by Ctrl + Alt + Del will
not correctly update the configuration data.)
18.
Start SETUP and select [Server] → [Event Log Configuration] → [Clear All Event Logs]
to clear the event logs (see Chapter 4).
19.
Verify that POST displays no error messages.
If POST displays an error message, take a note on the message and see the POST error
messages listed in Chapter 8.
20.
To add one or more CPUs to the server in 1-CPU configuration to operate the server with
more than one CPU, do the procedure below:
For Windows Server 2003 and Windows 2000, change the driver of [Computer] in the
device manager to [ACPI multi-processor PC] and then update the system (see Chapter 5).