NEC N8100-1078F User Manual page 82

4-14 Configuring Your Server
Server
Option
System
Management
Serial Console
Features
Event Log
Configuration
Assert NMI on
PERR
Assert NMI on
SERR
Resume on AC
Power Loss
FRB-2 Policy
Late POST
Timeout
Hard Disk OS
Boot Timeout
PXE OS Boot
Timeout
Parameter Description
N/A System Management submenu is
displayed.
N/A Serial Console Features submenu is
displayed.
N/A Event Log Configuration submenu is
displayed.
Disabled Indicates whether PCI PERR is
[Enabled] supported or not.
Disabled Indicates whether PCI SERR is
[Enabled] supported or not.
[Stays Off] Indicates the AC LINK function. Shows
Power On the state of the power of the server.
[Retry on Next Selects action if the boot processor will
Boot] be disabled.
Disable FRB2
Timer
[Disabled] Selects time limit for searching add-in
5 minutes card. The system will be reset on
10 minutes timeout.
15 minutes
20 minutes
[Disabled] Selects time limit for booting an
5 minutes operating system installed in the hard
10 minutes disk drive. The action taken on timeout
15 minutes is determined by the Fault Resilient Boot
20 minutes Timer policy option.
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
[Disabled] Selects time limit for booting an
5 minutes operating system using PXE boot. The
10 minutes action taken on timeout is determined by
15 minutes the OS Watchdog Timer policy option.
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes
Your Setting