Device Installation Or Removal Procedure; Base Cover - NEC Express5800/53La User Manual

DEVICE INSTALLATION OR REMOVAL PROCEDURE

The following explains the procedures for installing/removing the components:

Base Cover

To install/remove an option in/from your workstation, remove the base cover.
Removal
Take the following steps to remove the base cover:
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
If the cabinet is locked, unlock it.
3.
Lay down the workstation so that its base cover faces upward.
Lay down the workstation slowly and carefully.
Upgrading Your Workstation 9-5