Hot-plug SCSI RAID Drive Configuration
The optional SCSI RAID controller, hot-plug SCSI HDD bay and SCSI cable allow your server to
contain a maximum of six hot-plug SCSI hard disk drives as shown in the figure below. The hard
disk drives installed in the HDD bay are controlled by the SCSI RAID controller with each of the
RAID level of RAID, RAID1 or RAID5.
Also, you can add a new hard disk drive or replace a failed hard disk drive with a new one without
powering down the system.
Mother board
SATA cable
Floppy disk drive cable
Internal Cabling Diagrams 10-7
Option
Option
CD-ROM
Option
SCSI cable
5.25-inch
device bay
Floppy
disk drive
HDD cage