Upgrading Your Server - NEC N8100-1078F User Manual

6.
Push the 5.25-inch device to the device bay carefully.
NOTE:
Make sure that the cables are not caught while the 5.25-inch
device is pushed into the slot.
IMPORTANT:
inserted easily, push the device to the slots with it lifted a little.
7.
Fix the rails by using the screws removed in step 3.
Half-height device
8.
Check whether the installed 5.25-inch device is projected too much from the front of the
server.
Check the device installed in a 5.25-inch device bay based on the CD-ROM drive
normally installed.
If a 5.25-inch device occupying two slots cannot be

Upgrading Your Server 9-17

Full-height device