Appendix A Specifications - NEC N8100-1078F User Manual

Appendix A
Specifications
Item
CPU Type
Standard
Maximum
Chipset
Memory Standard
Maximum
Expansion unit
Expansion times
Memory module
Error check
Graphics (VRAM)
Auxiliary Floppy disk (standard)
input device
Hard disk (standard)
Hard disk (maximum)
RAID
Hot-plug
CD-ROM (standard)
5.25-inch file bay
3.5-inch disk bay
Additional PCI (64-bit/66MHz)
slot
PCI (32-bit/33MHz)
PCI EXPRESS (x4)
LAN interface
External Keyboard
interface
Mouse
USB
Serial
Network
Display
Cabinet design
External dimensions
Weight (Max.)
Power supply
Power consumption
Environmental Temperature
requirements
Humidity
Others
* The optional hot-plug HDD cage is installed.
NEC Express5800/120Eg
N8100-1078F
Intel Xeon processor
(3.20DGHz/1MB)
1
2
Intel E7320
512 MB (256 MB × 2)
8 GB (The standard DIMM must be replaced.)
2 DIMMs (512/1024/2048MB)
1 time
SDRAM DIMM (DDR333, Buffered type, Registered)
ECC
ATI RAGE XL (VRAM 8MB)
3.5-inch drive × 1 (standard)
None
Factory-installed (SATA): 500GB (250GB×2)
Option (SATA RAID): 1TB (250GB×4)
Option (SCSI/SCSI RAID): 1.2TB (300GB×4)
Option (SCSI RAID + HDD cage): 1.8TB (300GB×6)*
Option
Option (SCSI)
ATAPI interface × 1 (x40 speed)
4 slots (A standard CD-ROM drive is installed. Maximums of two backup
file devices are installed.)
4 slots (6 slots max.*)
2 slots
2 slots
Cannot be used
1000BASE-T/100BASE-TX/10BASE-T × 1
MINI DIN 6-pin connector (1 port)
MINI DIN 6-pin connector (1 port)
4-pin (2 ports)
D-sub 9-pin (2 ports)
RJ-45 (1 port)
MINI D-sub 15-pin (1 port)
Desk-side, mini tower
292.1* (width) × 453 (height) × 681 (depth) mm
* including stabilizers
23 kg (33 kg)
100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 Hz
640 VA, 625 W
10 to 35°C (operating), -10 to 55°C (non-operating, storage)
20 to 80% RH (no condensation)
NEC EXPRESSBUILDER supported, NEC ESMPRO provided in the
standard configuration
N8100-1079F
Intel Xeon processor
(3.60GHz/2MB)