Floppy Configuration Submenu; Usb Configuration Submenu - NEC N8100-1078F User Manual

4-8 Configuring Your Server

Floppy Configuration submenu

Option
Floppy A
Onboard Floppy
Controller
Super I/O Configuration submenu
Option
Serial Port A Address
Serial Port B Address

USB Configuration submenu

Option
USB Devices Enabled
USB Function
Legacy USB Support
Port 64/60 Emulation
USB 2.0 Controller
USB 2.0 Controller
Mode
USB Mass Storage
Device Configuration
Parameter
Disabled
720KB 3.5
[1.44 MB 3.5]
2.88MB 3.5
Disabled
[Enabled]
Parameter
Disabled
[3F8/IRQ4]
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
3F8/IRQ4
[2F8/IRQ3]
3E8/IRQ4
2E8/IRQ3
Parameter
–
Disabled
[Enabled]
Disabled
Keyboard Only
[Auto]
Keyboard and Mouse
[Disabled]
Enabled
[Enabled]
Disabled
FullSpeed
[HiSpeed]
N/A
Description
Set the settings of floppy disk
drive A (standard configuration).
Disables or enables the onboard
floppy drive controller.
Description
Disables or selects the I/O port
address and interrupt for serial
port A.
Disables or selects the I/O port
address and interrupt for serial
port B.
Description
Display only. Displays a list of
USB devices detected by BIOS.
If disabled, the USB ports do not
accept the USB device class 3
(HID: Human Interface Device).
Selects whether the USB
keyboard is made available in
OS which does not support USB
formally.
Enables I/O port 60h/64h
emulation for using the USB
keyboard with the non-USB
aware operating systems.
Enables or disables the USB 2.0
controller.
Selects the transfer speed on
USB 2.0.
Displays the USB Mass Device
Configuration submenu.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set