9-36 Upgrading Your Server
Installation
Install a DIMM in the following procedure.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the components as follows:
Side cover
Processor air duct
3.
Confirm the socket in which a DIMM is installed.
4.
Open the levers at both ends of the socket.
IMPORTANT:
force to the lever.
5.
Push the DIMM to the socket straight.
NOTE:
much pressure can damage the socket. Keyed DIMMs insert only one
way.
If the DIMM is inserted into the DIMM socket, the lever is automatically closed.
To avoid damaging the lever, do not apply an excess
Use extreme care when installing a DIMM. Applying too