Interface Cables; Standard Configuration - NEC N8100-1078F User Manual

10-2 Internal Cabling Diagrams

INTERFACE CABLES

An example of the connections of interface cables between devices within the server and external
devices is shown below.

Standard Configuration

The following shows an example of connection in the standard configuration:
The mother board has two serial ATA (SATA) connectors. "IDE" in the figure below is the primary
channel of Ultra ATA66 for the standard CD-ROM drive and optional PATA device.
Mother board
SATA cable
Floppy disk drive cable
Option
5.25-inch
Option
device bay
CD-ROM
Option
Floppy
disk drive
3.5-inch
disk bay