NEC N8100-1078F User Manual page 77

USB Mass Storage Device Configuration submenu
Option
USB Mass Storage
Reset Delay
Device #1
Emulation Type
PCI Configuration submenu
Option
Onboard Video
Dual Monitor Video
Onboard NIC 1
(10/100/1000)
Onboard NIC 1
(10/100/1000) ROM
Slot 1 Option ROM
Slot 2 Option ROM
Slot 3 Option ROM
Slot 4 Option ROM
Slot 5 Option ROM
Parameter
10 Sec
[20 Sec]
30 Sec
40 Sec
Device
[Auto]
Floppy
Forced FDD
Hard Disk
CDROM
Parameter
Disabled
[Enabled]
[Disabled]
Enabled
Disabled
[Enabled]
Disabled
[Enabled]
Disabled
[Enabled]
Configuring Your Server 4-9
Description
Number of seconds POST waits
for the USB mass storage device
after start unit command.
Display only. Displays the USB
mass storage device detected by
BIOS.
If Auto, USB devices less than
530MB will be emulated as
Floppy and remaining as hard
drive. Forced FDD option can be
used to force a HDD formatted
drive to boot as FDD (Ex. ZIP
drive).
Description
Enables or disables the onboard
video controller.
Select which graphics controller
to use in as the primary boot
device. Enabled selects the
onboard device.
Enables or disables the onboard
network interface controller.
Enables or disables the option
ROM scan for the onboard
network interface controller.
Initializes device expansion
ROM.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set