NEC N8100-1078F User Manual page 75

IDE Configuration submenu
Option
Onboard P-ATA
Channels
Onboard S-ATA
Channels
Configure S-ATA as
RAID
S-ATA Ports Definition
Mixed P-ATA/S-ATA
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
Hard Disk Write Protect
IDE Detect Time Out
(Sec)
ATA(PI) 80Pin Cable
Detection
Parameter
Disabled
[Primary]
Secondary
Both
Disabled
[Enabled]
[Disabled]
Enabled
[A1-Master/A2-Slave]
A1-Slave/A2-Master
N/A
N/A
[Disabled]
Enabled
0
5
10
15
20
25
30
[35]
[Host & Device]
Host
Device
Configuring Your Server 4-7
Description
Disables or configures the PATA
channels to primary, secondary,
or both.
Disables or enables the onboard
SATA controller.
Selects the SATA function as and
IDE controller or RAID controller.
Defines SATA port to IDE
channel. "A1" indicates the left
side SATA connection.
Displays the " Mixed P-ATA/S-
ATA" submenu. The " Mixed P-
ATA/S-ATA" submenu defines
the priority between the onboard
PATA and SATA channels. See
the online help displayed on the
"Mixed P-ATA/S-ATA" submenu
for details.
BIOS detects the IDE devices at
power-on and displays the
current status of the detected
IDE devices. Select each menu
to display the submenu. In the
submenu, you can configure the
IDE devices such as a device
type, PIO mode, DMA mode,
S.M.A.R.T. feature, data transfer
rate and so on.
Disables or enables hard disk
drives write protection through
BIOS.
Select the time out value for
detecting ATA/ATAPI devices.
This option is used to detect an
older IDE device with longer spin
up times.
Uses a mechanical 80-pin
interface cable to detect the host
and/or device(s).
Your Setting
[ ]: Factory-set