E-16 Installing Windows Server 2003
Installing SCSI Controller Driver (N8103-56F/95)
If you utilize SCSI controller driver (N8103-56F/95), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing RAID Controller Driver (N8103-80F)
To additionally install the N8103-80F in a system containing Windows 2003, connect the controller
and take the following steps to install the driver:
1.
When the [Found New Hardware Wizard] dialog box appears, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box appears, select [Search for a
suitable driver for my device (Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert
"Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk
drive, and click [Next].
4.
When the [Driver Files Search Results] dialog box appears, click [Next].
5.
Copying of the driver is completed, and the [Completion of the new hardware detection
wizard] dialog box below appears. Click [Complete].