Configuring Your Server - NEC N8100-1078F User Manual

4-12 Configuring Your Server

Security
IMPORTANT:
Option
Administrator
Password Is
User Password Is
Set Administrator
Password
Set User
Password
User Access Level
Clear User
Password
Fixed disk boot
sector protect
Password on boot
Set the passwords only after OS is installed.
Parameter
Installed
Not Installed
Installed
Not Installed
Up to seven
alphanumerics
Up to seven
alphanumerics
No Access
View Only
Limited
[Full Access]
Press Enter
[Disabled]
Enabled
[Disabled]
Enabled
Description
Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by clearing
password jumper on system board
(see Configuring Mother Board
Jumpers in this Chapter).
Status only, user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by clearing
password jumper on system board
(see Configuring Mother Board
Jumpers in this Chapter).
When the Enter key is pressed, the
user is prompted for a password;
press Esc key to abort. Once set, this
can be disabled by setting it to a null
string, or by clearing password jumper
on system board (refer to Configuring
Mother Board Jumpers in this
chapter). Set password to null to clear.
Administrator password controls
access to the setup utility.
When Enter is pressed, the user is
prompted for a password; press Esc
to abort. Once set, this can be
disabled by setting it to a null string, or
by clearing password jumper on
system board (refer to Configuring
Mother Board Jumpers in this
chapter). Set password to null to clear.
"No Access" prevents user access to
the SETUP utility.
"View Only" allows access to the
SETUP utility but no parameters are
changeable.
"Limited" allows only limited fields to
be changed.
Running this menu immediately clears
the user password.
Will write protect the boot sector of the
hard drive to prevent viruses from
corrupting the drive under DOS if set
to write protect.
Disables or enables password entry
on boot.
Your Setting