NEC N8100-1078F User Manual page 86

4-18 Configuring Your Server
Exit
The options on the menu are described below.
Save Changes and Exit
Exit after writing all modified BIOS SETUP item values to CMOS.
Discard Changes and Exit
Exit leaving CMOS unmodified. User is prompted if any of the setup fields ware modified.
Discard Changes
Read the previous values of the all BIOS Setup items from CMOS.
Load Setup Defaults
Load default values for all BIOS Setup items.
IMPORTANT:
[IDE Configuration] submenu of the [Advanced] menu to [Disabled]. If
the SATA hard disk drives are installed in your server and the onboard
SATA RAID feature is used, change the parameter of the [Configure S-
ATA as RAID] from [Disabled] to [Enabled] before exiting BIOS
SETUP utility.
Load Custom Defaults
Load custom defaults.
Save Custom Defaults
Save the current settings as custom defaults.
This option sets [Configure S-ATA as RAID] in the