Lamps; Lan Access Lamp; Status Lamp - NEC N8100-1078F User Manual

LAMPS

The following describes lamps on the server and their indications. See Chapter 2 for each location.

LAN ACCESS Lamp ( )

The LAN ACCESS lamp is lit green when the server is connected to LAN. The lamp blinks while
the server is accessed through the LAN (for packet transmission).

STATUS Lamp (

The STATUS lamp stays lit in green when the server is in successful operation. When the
STATUS lamp is unlit or lit/flashing in amber, it indicates that the server has failed.
The following table lists indications of the STATUS lamp, descriptions, and actions to take.
NOTES:
If the server has the NEC ESMPRO or Off-line Maintenance Utility
installed, you can view the error log to identify the cause of a
trouble.
To cycle power to the server, shut down the server from the OS to
and reboot it, if available. If the shutdown from the OS is not
available, disconnect and connect the power cord to reboot the
server.
)
Troubleshooting 8-3