GRAPHTEC CS1000EV User Manual page 45

4. LOADING A DOCUMENT
After the scanner is turned on and the driver settings have been enabled in the Scan
window, it waits for approximately two seconds before beginning the specified scan
operation.
Load the document in the scanner with the face to be scanned facing downward.
Do not place anything other than the document to be scanned on the scanning table,
as the scanner rollers may start rotating, which is extremely dangerous.
The document may not be fed in correctly if it is curled. The carrier sheet provided
should be used for curled documents (see Section 4.3, "Using the Carrier Sheet" for
details).
Load the document in the center of the scanner, as the document may be fed in at
an angle and not scanned correctly if it is significantly off-center.
4 – 4 CS1000EV/1100EV