Connecting The Scanner To A Power Supply - GRAPHTEC CS1000EV User Manual

3. PREPARING TO OPERATE THE SCANNER

3.2 Connecting the Scanner to a Power Supply

Insert the female plug of the power cord provided into the scanner's AC line inlet and insert
its male plug into an electrical socket supplying AC voltage.
Check that the scanner's Power switch remains in the Off position until the connection of
both the power cord and SCSI interface cable has been completed.
If you have a CS1100EV model, please refer to Section 2.2, "Part Names and Functions",
page 2-5, for the location of the AC line inlet.
Ensure that the scanner's Power switch is in the Off position.
3 – 2 CS1000EV/1100EV