Helpdesk Information; Supervisor Password - Ingenico iCT220 User Manual

Terminal User Guide

Helpdesk Information

Should you need to, details on how to contact the terminal
Helpdesk can be found on the contact sticker found on the
underside of your terminal. If appropriate, you may also find
these details on the inside cover of this User Guide.
You may
IDentification number) or your terminal's Serial Number. The
TID can be found at the top of each receipt from your
terminal; and the Serial Number (S/N) can be found at the top
of some reports and on the label on the underside of the
terminal.

Supervisor Password

Your terminal's Supervisor functions can be accessed by
means of a Supervisor password, and therefore it is not
supplied with a Supervisor Card.
Your terminal is shipped with an initial default password of
01483, but is configured so that a change of this password is
required before you process any transactions.
If you wish to do this before performing a transaction you
should refer to the section entitled Supervisor Password for
information on how to change the Supervisor password.
You are strongly advised to ensure that privileged access to
your terminal (including access to the Supervisor password) is
only granted to staff that have been independently verified as
being trustworthy.
be asked for your terminal's
Introduction
TID (Terminal
3