Table of Contents
Advertisement
8. Installation Mode
How to change ?
To set up the shutdown time, handle as follow:
1. Push the cursor key ↑ or ↓ to highlight No Signal. (menu 8-15)
2. Press ENTER to select.
The no signal menu will be displayed. (menu 8-16)
3. Push the cursor key ↑ or ↓ to highlight Shutdown Time.menu 8-16
4. Push the cursor key ↑ or ↓ to change the digits.
Or,
Enter the digits directly with the digit keys on the RCU.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-15
8.6 Contrast Enhancement
Purpose
Increases contrast for all video and data sources.
Contrast enhancement will reduce the light output of the projector.
To change the Contrast Enhancement value
1. Push the cursor key ↑ or ↓ to highlight Contrast Enhancement. (menu 8-17)
2. Press ENTER to select.
The contrast enhancement menu will be displayed. (menu 8-18)
3. Push the cursor key ↑ or ↓ to highlight the desired contrast enhancement, normal or high.
4. Press ENTER to select.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-17
8.7 Convergence
What can be done?
The convergence of the displayed image can be adjusted only by a qualified service technician.
80
Downloaded from ProjectorsManual.com Manuals
NO SIGNAL
COLOR [Blue]
SHUTDOWN [off]
Shutdown time:
5 min
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-16
CONTRAST ENHANCEMENT
NORMAL
HIGH
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-18
R5976333 BARCOELM R18 17092002
Advertisement
Table of Contents
