Changing The Shutdown Setting; Changing The Shutdown Time; Contrast Enhancement - Barco BarcoSLM G8 Owner's Manual

8. Installation Mode
8.5.2

Changing the Shutdown Setting

How to change ?
1. Push the cursor key ↑ or ↓ to highlight No Signal. (menu 8-14)
2. Press ENTER to select.
The no signal menu will be displayed. (menu 8-15)
3. Push the cursor key ↑ or ↓ to highlight Shutdown.menu 8-15
4. Press ENTER to toggle between [On] or [Off].
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL

CONTRAST ENHANCEMENT

CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-14
8.5.3

Changing the Shutdown Time

Range
The shutdown time can be set between 5 min. and 60 min.
How to change ?
To set up the shutdown time, handle as follow:
1. Push the cursor key ↑ or ↓ to highlight No Signal. (menu 8-16)
2. Press ENTER to select.
The no signal menu will be displayed. (menu 8-17)
3. Push the cursor key ↑ or ↓ to highlight Shutdown Time.menu 8-17
4. Push the cursor key ↑ or ↓ to change the digits.
Or,
Enter the digits directly with the digit keys on the RCU.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-16
8.6 Contrast Enhancement
Purpose
Increases contrast for all video and data sources.
Contrast enhancement will reduce the light output of the projector.
94
NO SIGNAL
COLOR [Blue]
SHUTDOWN [off]
Shutdown time: 5 min
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-15
NO SIGNAL
COLOR [Blue]
SHUTDOWN [off]
Shutdown time: 5 min
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 8-17
R5976386 BARCOSLM G8 20/10/2004