Main Menu
How to change the scan rate ?
Push the cursor keys é or ê to select a new scan rate (menu 1).
1
2
Press ENTER to activate this scan rate.
e.g. 100 Hz 625 lines P ==>
Vertical frequency of the image : 100 Hz
Quantity of horizontal lines : 625 lines
Interlace mode : P = Non-interlaced image (progressive scan).
MULTIPLIER MODE
50 Hz 625 lines
100 Hz 625 lines
50 Hz 1250 lines
100 Hz 1250 lines
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Motion Processing
Why Motion Processing ?
With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of
motion artifacts.
How to activate ?
Push the cursor keys é or ê to select 'Motion Processing' (menu 1).
1
2
Press ENTER to toggle between ON and OFF.
IMAGE PROCESSING
Line Multiplier : ON
Multiplier Mode
Motion Processing : ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
Video Equalizing
What can be done ?
The shapness of the image can be adjusted for 3 frequency ranges (low, medium and high) separately.
To make it a little bit easy, 7 pre-programmed factory presets are available. The customer is also free to adjust its own sharpness
for the 3 ranges.
How to select Video Equalizing ?
Push the cursor keys é or ê to select 'Video Equalizing' (menu 1).
1
2
Press ENTER to display the adjustment menu (menu 2).
IMAGE PROCESSING
Line Multiplier : ON
Multiplier Mode
Motion Processing : ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5-4
P
P
P
I
LOW
MID
FACTORY PRESET : x
Select with ç or è
Adjust or scroll presets
with é or ê
<EXIT> to return.
menu 2
HI.
5976064 BARCOCINE 8 09022000