Multiplier Mode; What Can Be Selected Within The Multiplier Mode; How To Start Up The Multiplier Mode Menu; How To Change The Scan Rate - Barco R9002384 Owner's Manual

Multiplier Mode

What can be selected within the multiplier mode ?

The multiplier menu makes it possible to select different scan rate for the connected video signal.

How to start up the Multiplier Mode menu ?

1 Push the cursor keys é or ê to select 'Multiplier Mode' (menu 1).
2 Press ENTER to select and to display the Multiplier Mode menu (menu 2a or menu 2b)
Depending on the frequency of the input source, menu 2a or menu 2b will be displayed.
IMAGE PROCESSING
é ê
menu 1

How to change the scan rate ?

1 Push the cursor keys é or ê to select a new scan rate (menu 1).
2 Press ENTER to activate this scan rate.
e.g. 100 Hz 625 lines P ==>
Vertical frequency of the image : 100 Hz
Quantity of horizontal lines : 625 lines
Interlace mode : P = Non-interlaced image (progressive scan).
MULTIPLIER MODE
é ê
menu 1
5976197 BARCOCINE 7 10012001
MULTIPLIER MODE
é ê
menu 2a
MULTIPLIER MODE
é ê
menu 2b
Main Menu
5-3