Printing A Specified Area - Trimming - Canon iP6700D - PIXMA Color Inkjet Printer Printing Manual

Printing a Specified Area – Trimming
You can print a specified area of the photo displayed on the LCD.
Please trim the photo after specifying the page size, media type, Borderless/
Bordered on each settings screen. If you change the settings after trimming the
photo, the trimmed selection will be lost.
1
Select the photo to trim.
2
Set the trimming mode.
Press the Trimming Trimming Trimming Trimming button.
The printer is now in trimming mode.
3
Trim and rotate the sections you wish to print
• Trimming Trimming button: You can rotate the trimming area. Trimming Trimming
• buttons: You can move the area for trimming.
• buttons: You can enlarge or reduce the trimming area.
4
Finalize the trimming area.
Press the OK OK button. OK OK
The trimming area is fixed.
When the trimming area has been fixed, a yellow trimming guide
appears in the photo displayed on the LCD.
You can modify the trimming area by pressing the Trimming
button once again even after the trimming area has already been
finalized.
If you want to cancel the trimming setting, press the Trimming
button and then the Stop/Reset
Removing the memory card also cancels the trimming setting.
You cannot save the trimmed photo in the memory card.
Trimming guide
.
Stop/Reset button in the trimming screen.
Stop/Reset Stop/Reset
Trimming
Trimming Trimming
Trimming
Trimming Trimming
25