Table of Contents
Advertisement
Procedure 5-10 Configuring the frame size
CONFIG — OBJECT — PORT — <U>
where size is the desired maximum frame size (16 to 4472 bytes)
Application type
The Speed Touch 591s can be configured to ensure quality of service for frame relay
traffic over the SHDSL line (in which case, an equivalence is made between certain
frame relay and ATM services), or to simply forward frames.
Procedure 5-11 Configuring the application type
1
Enter:
CONFIG — OBJECT — PORT — <U>
2
Select the application type:
a
b
where profile_number is a user translation profile number (refer to Alcatel 7350
ASAM Technical Practices for further information on frame relay user translation
profiles)
Speed Touch 591s Technical Practices
February 2001
90-8785-01
For frame relay:
FRAME_RELAY
For frame forwarding:
FRAME_FWD then
TRANSLATED — <profile_number>
5 — Configuring frame relay port parameters
— STREAM — FRAME_SIZE — <size>
— STREAM — APPLICATION
or TRANSPARENT
5-7
Advertisement
Table of Contents
