Table of Contents
Advertisement
Procedure 4-9 Configuring the
HOUSE — MORE — IP_ADDRESSES — CTL_VP/VC — <0/vci>
where vci is a VCI number in the range 32 to 158
Applying the IP address configuration
The IP address parameters are not applied until they have all been correctly
configured individually, and the configuration has been applied globally.
Procedure 4-10 Applying the IP address configuration
HOUSE — MORE — IP_ADDRESSES — PROG_TO_CURR
Configuring level 0 access
The system has six access levels, numbered 0 to 5. Enter your access level and
password when you log in. Refer to Alcatel 7350 ASAM Technical Practices for
further information on access levels. Level 0 access allows read-only access to all
node management functions on the Speed Touch 591s and does not require a
password. Only a level 5 user can configure level 0 access.
Procedure 4-11 Configuring level 0 access
HOUSE — MORE — LEVEL_0 — ENABLE* or DISABLE
Speed Touch 591s Technical Practices
February 2001
90-8785-01
4 — Configuring generic node parameters
control VP/VC
4-7
Advertisement
Table of Contents
