Table of Contents
Advertisement
13 — Maintenance and file transfers
Procedure 13-8 Configuring a loopback
1
Enter:
MAINT — OBJECT — PORT — <U>
2
Select:
LATCHED or TIMED
Procedure 13-9 Removing a loopback
MAINT — OBJECT — PORT — <U>
Procedure 13-10 Removing all loopbacks
MAINT — OBJECT — PORT — <U>
Verifying the status of the data stream
The status of the data stream can be verified.
Procedure 13-11 Displaying information on the data stream
MAINT — OBJECT — PORT — <U>
An example of the information displayed on the NMTI is shown in Figure 13-5. Refer to
Alcatel 7350 ASAM Technical Practices for further information on frame relay stream
status fields.
13-8
Note — If a loopback is already active, an error message is displayed.
— LOOPBACK — EQUIPMENT or LINE — CLEAR
— LOOPBACK — CLEAR_ALL
— STREAM
— LOOPBACK — EQUIPMENT or LINE
Speed Touch 591s Technical Practices
90-8785-01
February 2001
Advertisement
Table of Contents
