Table of Contents
Advertisement
RBS
When the AAL1 service mode is configured to SDT_CAS, RBS can be enabled or
disabled on T1 channels to support CAS service on the T1 CE port.
Procedure 10-8 Configuring RBS
1
Enter:
CONFIG — OBJECT — PORT — <U>
2
Specify the channel, channels, or channel group.
a
b
c
3
Select:
ON or OFF
Speed Touch 591s Technical Practices
February 2001
90-8785-01
For a single channel, enter:
<channel_id>
where channel_id is a number from 1 through 24
For a channel group, enter:
<CGnumber>
where number is the lowest numbered channel in a channel group
For a channel range, enter:
<n1-n2>
where n1 is the start of the channel range in the Chan # column and n2 is the last
channel in the range in the Chan # column
10 — Configuring the T1/E1 CE port
— OPTIONS — PHYSICAL — MORE — RBS
10-9
Advertisement
Table of Contents
