Table of Contents
Advertisement
Procedure 5-13 Configuring pacing
CONFIG — OBJECT — PORT — <U>
where value is a pacing rate in kb/s
HDLC
The Speed Touch 591s user port can be configured to support either standard or
inverted HDLC. The minimum number of flags transmitted between HDLC frames
can also be configured. The default setting is 1 flag (back-to-back frames).
Procedure 5-14 Configuring HDLC
CONFIG — OBJECT — PORT — <U>
STANDARD* or NUM_FLAGS — <number>
where number is the number of HDLC flags between frames, in a range from
1 to 10
Procedure 5-15 Configuring the PVC management type
1
Enter:
CONFIG — OBJECT — PORT — <U>
TYPE
2
Select:
NONE or LMI or ANNEX_A or ANNEX_D or AUTO-NET
3
Select:
a
b
Speed Touch 591s Technical Practices
February 2001
90-8785-01
For LMI:
USER or NETWORK or NETEXT
For ANNEX_A or ANNEX_D:
USER or NETWORK or BIDIR
5 — Configuring frame relay port parameters
— STREAM — OPTIONS — PACING — <value>
— STREAM — OPTIONS — HDLC — INVERTED or
— STREAM — OPTIONS — PVC_MGMNT —
5-11
Advertisement
Table of Contents
