Table of Contents
Advertisement
Procedure 15-4 Displaying T1 port physical statistics
1
Enter:
STATS — OBJECT — PORT — <U>
2
If 15-min interval statistics have been selected, select the interval.
a
b
c
d
3
When the current 15-min interval displays, specify how the statistics are to be
displayed.
a
b
Displaying network port statistics
ATM statistics can be displayed for the network port. For details on ATM statistics,
refer to Alcatel 7350 ASAM Technical Practices.
Displaying endpoint statistics
ATM statistics can be displayed for the network endpoint. For details on ATM
endpoint statistics, refer to Alcatel 7350 ASAM Technical Practices.
Displaying channel group statistics
AAL1 statistics can be displayed for channel groups configured on the T1 port. They
are the same as those for the V.35/X.21 CE version of the Speed Touch 591s; refer
to section 15.2 for details.
Speed Touch 591s Technical Practices
February 2001
90-8785-01
To display statistics for a specific interval, enter:
INTERVAL_ID — <interval>
where interval is 1 to 96
To display statistics for the previous interval, select:
PREV_INTVL
To display statistics for the next interval, select:
NEXT_INTVL
To display the statistics for the current interval, select:
CURRENT
To clear the statistics and display them as they increase, select:
TEMP_CLEAR
To display the accumulated statistics that have been cleared by
TEMP_CLEAR, select:
CURRENT
— PHYSICAL — 15_MINUTE or 24_HOUR
15 — Statistics
15-11
Advertisement
Table of Contents
