Alcatel Speed Touch 591s Technical User's Manual page 83

Procedure 7-4 Configuring FRSC-type TCA profiles
To configure the value for MCT as 25% in the low-delay queue for profile 1, and to enable
the profile on the user port:
1 Enter:
CONFIG — OBJECT — PORT — <U>
LOW_DELAY — MCT — <25>
2 Press <Esc> to move up a level in the softkey tree.
3 Select:
TCA_PROFILE — CONGESTION — PROFILE_NUM
At this stage the available profiles can be displayed by pressing <Esc> <1>.
4 Enter:
<1>
Speed Touch 591s Technical Practices
February 2001 90-8785-01
Table 7-3 Threshold values for frame relay queue congestion
Parameter Threshold
REAL_TIME ACT
SCT
MCT
LOW_DELAY ACT
SCT
MCT
COM_THRUPUT ACT
SCT
MCT
BEST_EFFORT ACT
SCT
MCT
Note — As many as eight FRSC profiles can be defined, but only one
profile can be enabled on the user port at a time.
— TCA_PROFILE — CONGESTION — ENABLE
Range (ms) Default value
0 to 3600 500
0 to 3600 400
0 to 3600 250
0 to 3600 800
0 to 3600 625
0 to 3600 400
0 to 3600 1250
0 to 3600 1000
0 to 3600 625
0 to 3600 1250
0 to 3600 1000
0 to 3600 625
— STREAM — OPTIONS — THRESHOLD —
7 — TCA profiles
7-9