System Setup - Digital Watchdog PTZ37XFM User Manual

3
OSD -

SYSTEM SETUP

1
SYSTEM SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<DATE/TIME SETUP>
<RELAY TYPE>
<PASSWORD>
<SET HOME POSITION>
<SET NORTH DIRECTION>
LANGUAGE ENGLISH
AUTO CAL. OFF
BACK
EXIT
Press
Near/Enter
Key
2
DATE/TIME SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
0 1 /JAN/2008(TUE)
DATE
TIME
00:00:0 1 (H/M/S)
BACK
EXIT
3
RELAY TYPE SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NORMAL OPEN
RELAY 1
RELAY2
NORMAL OPEN
RELAY 3
NORMAL OPEN
RELAY4
NORMAL CLOSE
BACK
EXIT
4
EDIT PASSWORD
- - - - - - - - - - - - - - - - - - - - - - - - - - -
[ ]
- - - - - - - - - -
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
K LMN O P Q R S T
U V W X Y Z a b c d
e f g h i j k l m n
o p q r s t u v w x
y z < > - / : .
OK
CANCEL
DISABLE
1 SYSTEM SETUP
<DATE/TIME SETUP>
Opens DATE/TIME SETUP menu.
<RELAY TYPE>
Opens RELAY TYPE menu.
<PASSWORD>
Opens PASSWORD menu.
<SET HOME POSITION>
Opens SET HOME POSITION menu.
<SET NORTH DIRECTION>
Opens SET NORTH DIRECTION menu.
LANGUAGE ENGLISH / ESPAÑOL / FRANÇAIS / DEUTSCH
/ ITALIANO /
You can select a preferred language for the OSD display.
After selecting a language, press Near or Enter key.
AUTO CAL. ON / OFF
If the camera is continuously subjected to very high temperatures
(over 50°C or 122°F) for a long period of time, it is possible for the
camera to lose focus and produce blurry images. When this happens, it
is recommended to turn ON the auto calibration feature.
If AUTO CAL is set to ON, it will be conducted for 10 seconds every
24 hours.
- During auto calibration, unexpected images can appear due to
unordinary PTZ movement.
- During auto calibration, the figures "A.C" will be displayed on the
bottom left cornor of the screen.
- During auto calibration, some functions including PTZ cannot be
executed.
RELAY TYPE SETUP
2
RELAY1, 2, 3, 4
NORMAL OPEN (N.O) / NORMAL CLOSE (N.C)
Define the type of relay output for each of the four relays.
EDIT PASSWORD
3
Set a password that consist of 4 characters. If this function is set
to ENABLE, the password is required whenever you open the
OSD menu.
The default password is "4321," and the master password is "- - > g."
39
/ PORTUGUÊS