Countershaft Disassembly; Driveshaft Disassembly - Suzuki Katana 1100 Service Manual

3-43 ENGINE
COUNTERSHAFT
DISASSEMBLY
• Remove the left end bearing
CD
and oil seal
0.
2
• Remove the Top drive gear circlip
®
from the groove and
slide the circlip
®
toward the 3rd drive gear
0.
09900-06104: Snap ring pliers
• Slide the Top drive gear
®
toward the 3rd drive gear
0
and
remove the pair of the lock washers
®
from the groove and
slide the pair of the lock washers
®
and 2nd drive gear
0
toward the Top drive gear
®.
- 4
• Remove the 2nd drive gear circlip @, and then remove the
2nd drive gear
0,
Top drive gear
®
and 3rd drive gear
0.
8
• Remove the 4th drive gear @ by removing the circlip (1).
09900-06107: Snap ring pliers
DRIVESHAFT
DISASSEMBLY
• Each driven gear on the driveshaft is easily removed by using
9
snap ring pliers.
09900-06107: Snap ring pliers
I
The order of disassembling is as follows:
CD
Right end bearing
®
Top driven gear
o
Low driven gear
®
2nd driven gear
®
4th driven gear
0
Left end bearing
o
3rd driven gear @ Oil seal
®
Spacer
10