ENGINE
3-12
• Firmly grip the cylinder block at both ends, and lift it straight
up. If the block does not come off, lightly tap on the finless
portions of the block with a plastic mallet to shake the
gasketed joint loose.
CAUTION:
Be careful not to damage the fins when removing or
handling the cylinder block. This precaution applies to the
cylinder head also.
• Scribe the cylinder No. on the head of the respective pistons.
• Place a cloth benei'lth the piston so as not to drop the parts
in the crankcase, and remove the circlip
CD
with long-nose
pliers.
• Draw out the piston pin. Place each piston pin in the same
piston as that it was removed from.
• Remove the starter motor by removing the bolts.
• Remove the generator by removing the bolts.