CHASSIS
7-14
• Remove the master cylinder assembly by removing the two
clamp bolts.
• Remove the brake lever by removing the bolt.
• Remove the reservoir cap and diaphragm by removing the
two screws.
• Drain brake fluid.
• Remove the dust seal boot.
• Remove the circlip with the snap ring pliers.
09900-06108: Snap ring pliers
• Remove the spring/primary cup/piston/secondary cup out
of the master cylinder.
MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or other
damage.
Inspect the piston surface for any scratches or other damage.
Inspect the primary cup, secondary cup and dust seal boot for
wear or damage.